All posts in Boeshield T-9 Bicycle

Boeshield T-9 Bicycle >>

Boeshield T-9 Bicycle

by admin on

How to use Boeshield T9 Bicycle?

One Step Application: Clean, Lubricates, Protects
Boeshield T-9 will dissolve itself and flush out any other (old) lubricant. For best results apply and allow at least 2 or more hours for complete penetration. Then wipe off all external residue.

No Dirt Pickup
After wiping off, Boeshield T-9 will dry quickly, leaving no sticky film to gather dirt and mud.

Completely Waterproof
Once dry, Boeshield T-9 will not wash off in rain, puddles, and mud. Water washing will remove sand, dust, and grime, but not the lubricant.

Boeshield T-9 is Aviation Technology for Bicycle Chains:

  • Solvent Base flushes out old lubricants, even when you have cleaned your chain before you start to use T-9 (you may notice this when the chain becomes greasy/black the first few times that you have started to use T-9).
  • Penetrates deeply to thoroughly coat inner pins and rollers (always use enough T-9 so it is able to fully penetrate all parts of your chain).
  • Dries to a clean Paraffin Wax film so it will not pick up dirt.
  • Lubricates and protects for 150 to 200 miles per application.

Also great for maintaining these bicycles components:

  • Drive chain
  • Derailleur
  • Brake cables
  • Shift cables
  • Caliper pivots
  • Seat posts
  • Spoke nipples
  • Inside your frame
  • E-bike electronics and connectors

Don’t forget to check out the video page on how to protect the inside of your bike frame against corrosion.

Boeshield T-9 Bicycle

All Boeshield T-9 packing are the same product and have the same benefits.